Trade
A large variety of different types of rubber conveyor belts, rubber rolls and rubber vulcanisable for splicing conveyor belts.
Rubber Conveyor Belts
Rubber Conveyor Belts
- Anti-abrasive
- Oil resistant
- Heat resistant
- Fireproof
- Acid-resistant
- Antistatic
- Food-White (FDA)
- Elevator
- Accordion
- Conveyor belts with V ribs, so-called
- SHEWRON belts
- Patterned
- Conveyor belts with steel cord
TYPES OF CONVEYOR BELTS
GENERAL PURPOSE CONVEYOR BELTS "W", "X", "Y", "Z"
Conveyor belt of normal quality is suitable for general purpose. Excellent abrasion properties enable the transport of various materials. The working temperature of the strip is – 25ºC to + 60ºC, which is suitable for the transport of coal, peat, kaolin, lime, cement, clay, sand, gravel, salt, earth, superphosphate, cereals…
SPECIAL PURPOSE CONVEYOR BELTS
K – flame retardant with coatings and antistatic (high risk of burning)
S – hardly flammable with and without coating and antistatic (risk of burning very high)
T – heat resistant
G – resistant to oils and fats
FDA – for food
TYPE K (NON-FLAMMABLE, ANTISTATIC CONVEYOR BELT, FIRE RESISTANT)
With its self-extinguishing and antistatic characteristics, this type of belt is specially designed for use in coal mines and where there is a risk of fire. The self-extinguishing feature of the belt excludes the possibility of transmitting fire by the transport system because it does not cause a fire, and in case it is in the center of the fire, it extinguishes itself when exiting. The antistatic properties of the tape extend safety, because it is able to conduct the induced static electricity into the ground and thus prevent the outbreak of fire.
TYPE TC HEAT RESISTANT (CONVEYOR BELTS FOR TRANSMISSION OF HOT MATERIAL)
These types of conveyor belts are very resistant to heat and wear. They are intended for the transfer of hot materials, as follows: ash, hot bricks, coke, clinker, sand, ore…
Heat-resistant tapes are divided into:
T1 – heat-resistant, for transport of materials up to 80 ° C
T2 – heat-resistant, for transport of materials up to 150 ° C
T3 – heat resistant, for transport of materials from 180 to 200 ° C
TYPE G (OIL RESISTANT CONVEYOR BELTS)
Conveyor belt type G is suitable for transporting hot and cold materials that contain oil or fat in normal proportions: oilseeds (sunflower, oilseed rape, soybeans), oil-contaminated parts, oil-treated coal.
FDA TYPE (FOOD TAPE)
Conveyor belt intended for the food industry, ie. foodstuffs. This type of conveyor belt must not contain – copper, lead, barium we must not color the food or soil it it must not contain components that would dissolve in contact with food or give a bad taste
ELEVATOR CONVEYOR BELTS
They are used for vertical transport of loose materials. Buckets (steel or plastic) are fastened to the tape with the help of screws. The dimensions and shape of the screw are defined by the standards. They are most often used in the transmission of cereals, milling industry, seed cells, raw materials industry…
The most important thing for a quality elevator belt selection is the elevator capacity.
At the customer’s request, we drill holes according to previously submitted data or technical drawing.
HARMONIC CONVEYOR BELTS
They are used to transfer material at a certain incline that is so steep that it usually happens that the material slides or rolls backwards. The harmonic strips have rubber sidewalls and transverse ribs which are an integral part of it and are connected to the upper layer of the strip and as such form a single whole. They are used for the transport of gravel, sand, coal, limestone and limestone material, bulk materials (wheat, corn, soybeans…). We offer three standard accordion heights: H60, H80 and H120.
RIBBED CONVEYOR BELTS
They are used to transfer material at a certain inclination (not less than 21 °) which is so steep that it usually happens that the material slides or rolls backwards. Ribbed conveyor belts have rubber profiles that are an integral part and are vulcanized for the upper application of the belt. They are used for transport of bags, boxes, bales, asphalt, salt spreaders… Maximum transport angle 30-50 ° C (small fruits and legumes)
PATTERNED CONVEYOR BELT
They are used for the transport of packages, sacks, crates, and similar loads at an inclination of 18-40 ° C. They are used in the transport of wooden boxes, plastic boxes, chipboard, paper bags…
CONVEYOR BELTS WITH STEEL CORD
Various types and conditions of exploitation require that the conveyor belt meets all the requirements in a satisfactory manner. In that sense, steel in the form of ropes of different constructions is often used to make the supporting structure of the tape that should work in such conditions. Conveyor belts with steel ropes together with conveyor belts with canvas inserts form one production, technological and exploitation-economic unit.
RUBBER IN ROLL OF DIFFERENT THICKNESS, PATTERN AND QUALITY
NS COPEX doo distributes tires in rolls of different thicknesses and qualities.
We are able to offer you:
Rubber linings with cut rhomboid patterns for rubberizing drums, width from 100 to 2000mm
Rubber linings for different operating conditions: temperatures, oils or greases, petroleum products, acids, with a higher coefficient of abrasion… width from 100 to 2000 mm
Smooth rubber linings without cut patterns, width from 100 to 2000 mm
Rubber linings with one or more plane trees from 100 to 2000 mm wide
Floor tiles for floor coverings, paths, stairs, platforms, wagons, decks, public buildings, etc. in multiple colors and constructions
UNVULCANIZED RUBBER FOR CONNECTION OF CONVEYOR BELTS AND PRODUCTION OF RUBBER TECHNICAL GOODS
NS COPEX doo also distributes unvulcanized rubber of various quality, at the customer’s request
ADHESIVES AND TOOLS FOR JOINING RUBBER CONVEYOR BELTS
NS COPEX doo, offers you adhesives for joining rubber conveyor belts by cold and hot process, as well as all the necessary tools from renowned global manufacturers
Address
Omladinska bb
22328 Krusedol selo